FIBC Jumbo Bag with discharge spout and 2 Loops , Belt across the middle ,cover on the top

U-panel type Jumbo Bag made of circular, uncoated  PP woven Material , white colour

fabric (160 GSM), UV stabilized.

1 Filling Spout – Dia 35 cm x Height 50 cm  

2 Discharge Spout – Dia 35 cm x Height 50 cm

3 Lifting Loop – 04 nos. Corner loop, 30 cm above the bag

4 S.W.L – Over 1000 Kg.

5 Safety Factor – 5:1

6 Bag weight – 1.5 kg. (+/-2%)

7 Bag size (+/-2% cm.) – (90-120) x (90-120) x (90-150cm)

The ton bag can generally be customized according to the special needs of the end user, including the size of the bag body and the loading and unloading openings, the style of the sling, the specifications of the base fabric, whether it needs to be coated, whether it needs to be an inner bag, etc. It can also be designed according to the characteristics of the product.

loading. First, hang the lifting ring of the container bag symmetrically on the beam of the filling machine, so that the bottom of the container bag is basically in contact with the ground, then open the filling port of the container bag, put it into the charging barrel and clamp it by the clamping device to avoid dust or particle leakage. Start the filling machine to put the raw materials into the bag from the charging port, and straighten the bag body before filling. After filling, close the charging port. If using a container bag with a discharge port, check whether the bottom is tied well before filling.

store. In principle, after the container bag is loaded, it should be loaded and left immediately, but if necessary, it cannot be transported immediately. In order to avoid material damage, the container bag should be stored in the warehouse, and the surrounding environment should be kept away from water, steam, humidity and High temperature sources, such as when stored outdoors, in addition to meeting the above environmental conditions, should also be covered with tarpaulins and avoid direct sunlight.

unloading. Lift the container bag with a forklift or crane, align it with the mouth of the trough or other container, open the tether at the bottom of the bag body, and the raw material can fall by itself to complete the unloading. For single-use container bags, a suitable tool can be used to puncture the bottom of the bag at a distance to discharge the material. During lifting and unloading operations, do not stand under the FIBC.